Kaba e plex 2000 installation handboek

Kaba E-PLEX 2000 Series Installation Instructions Manual 49 pages Kaba E-PLEX 2000 Operation Manual 16 pages Kaba e-plex 2000 Installation Instructions Manual 10 pages A-1 Determine which template fits your E-Plex 2000 installation (either the 23⁄8" [60 mm] Backset or the 23⁄4" [70 mm] Backset). A-2 Place appropriate paper template (supplied) onto door and mark for holes. Drill the three 1⁄2" (13 mm) holes first. Next drill the 21⁄8" (54 mm) cross bore hole. Drill the 1" (25 mm) hole last. fileslib. Insert latch unit into the 1" (25 mm) hole, making certain that the latch bolt bevel faces direction of closing door. 4. Secure the latch to the door using two 1" (25 mm) Phillips Mounting screws supplied. Latch unit faceplate must be flush with door (for doors with 1" diameter hole, use sleeve on latch). A-2. Handing: Non-handed, pre-assembled for left-hand door installations—easily changed in the field Key Override: Key-in-lever cylinders Small format interchangeable cores Large format removable cores Operation Modes: PIN access Lockout Passage—can be toggled on/off or can be pre-programmed to relock after a certain number of hours (from 1 to 24)